7150 Aluminum Plate & Extrusions
Arch Metals supplies 7150 aluminum plate and extrusions from Dallas, Texas, for aerospace and defense manufacturers across Texas and the surrounding states. 7150 is a very high-strength alloy designed for compression-loaded aircraft structure. We supply it mainly as 7150-T7751 plate and 7150-T77511 extrusions, with certified material and saw cutting to your dimensions. Availability depends on temper and size, so request a quote and we’ll confirm what we can supply.
7150 Aluminum Plate and Extrusion Forms
- Plate, saw cut to size
- Extruded bar
- Extruded shapes and stringer sections on request
Thickness, diameter and length availability changes with mill supply. Send us your sizes through our quote request form and we’ll confirm stock, lead time and pricing.
7150 Aluminum Tempers and Specifications
- 7150-T7751 plate (ASTM B209): solution heat treated, stretched and given a multi-step aging treatment. It combines high strength with better exfoliation and stress-corrosion resistance than peak-aged T6-type tempers.
- 7150-T77511 extrusions (AMS 4345, ASTM B221): the extruded equivalent, stretched with minor straightening allowed. It is widely used for stringers and other long structural members.
Not sure which temper or specification your drawing calls for? Send us the print requirements and we’ll match the material.
Typical Properties of 7150-T77511 Aluminum
- Ultimate tensile strength: about 87 ksi (600 MPa)
- Yield strength: about 80 ksi (550 MPa)
- Elongation: about 10%
- Density: 0.102 lb/in³ (2.82 g/cm³)
- Chemistry: high-purity aluminum alloyed with zinc, magnesium and copper, plus zirconium
These are typical values for 7150-T77 tempers. Guaranteed minimums vary by specification, temper and thickness, so check the governing spec or your mill cert for design values.
Why Engineers Specify 7150 Aluminum
7150 is a higher-purity, higher-strength development of 7050 aluminum. Its high compressive strength makes it a common choice for upper wing structure, where parts are loaded mainly in compression. Compared with 7075 aluminum, the T77 tempers deliver similar or higher strength with much better corrosion resistance. Common uses for 7150 include:
- Upper wing skins and stringers
- Keel beams and floor beams
- High-strength aircraft fittings
- Compression-loaded structural members
7150 Aluminum FAQs
How does 7150 compare with 7050 aluminum?
7150 is a higher-purity, higher-strength relative of 7050 aluminum. It is used where extra strength, especially compressive strength, justifies its higher cost.
What does the T77 temper do?
T77 is a multi-step aging treatment. It gives strength close to a peak-aged temper while improving resistance to exfoliation and stress-corrosion cracking.
Is 7150 aluminum readily available?
7150 is a specialty aerospace alloy, and plate and extrusion sizes depend on mill supply. Send us your requirements and we’ll confirm availability and lead time.
Cut-to-Size 7150 Aluminum With Delivery Across Texas
We ship 7150 aluminum plate and extrusions throughout Texas, Oklahoma, Louisiana, New Mexico and Arizona, and we saw material to the size you need. See our processing services for cutting options, or browse all the metals we supply.
To get pricing, send us the alloy, temper, form, size, length and quantity through our quote request form, or call (888) 444-6061.