Ti 6Al-4V Grade 5 Titanium Bar & Plate

Arch Metals supplies Ti 6Al-4V (Grade 5) titanium bar and plate from Dallas, Texas, for aerospace, medical and high-performance industrial customers across Texas and the surrounding states. 6Al-4V is the most widely used titanium alloy, with an excellent strength-to-weight ratio and outstanding corrosion resistance. We supply annealed bar to AMS 4928 and ASTM B348, and plate to AMS 4911 and ASTM B265, with certified material and saw cutting to size. Request a quote and we’ll confirm sizes and availability.

Ti 6Al-4V Titanium Forms

  • Round bar, annealed
  • Plate and sheet, annealed
  • Saw-cut blanks

Size availability changes with mill supply. Send us your sizes through our quote request form and we’ll confirm stock, lead time and pricing.

Titanium round bars

Ti 6Al-4V Conditions and Specifications

  • Annealed bar (AMS 4928, ASTM B348 Grade 5): the most common aerospace condition for machined parts.
  • Annealed plate and sheet (AMS 4911, ASTM B265 Grade 5): for machined plate parts and formed sheet components.
  • Solution treated and aged (STA) (AMS 4965): heat treated for higher strength where the design calls for it.
  • ELI grade (ASTM F136, Grade 23): extra-low interstitial 6Al-4V for medical implants and fracture-critical parts, available on request.

Not sure which condition or specification your drawing calls for? Send us the print requirements and we’ll match the material.

Typical Properties of Annealed Ti 6Al-4V

  • Ultimate tensile strength: about 138 ksi (950 MPa)
  • Yield strength: about 128 ksi (880 MPa)
  • Elongation: about 14%
  • Hardness: about 36 HRC
  • Density: 0.160 lb/in³ (4.43 g/cm³)
  • Chemistry: titanium alloyed with about 6% aluminum and 4% vanadium

These are typical values for annealed Ti 6Al-4V. Guaranteed minimums vary by specification, condition and size, so check the governing spec or your mill cert for design values.

Why Engineers Choose Ti 6Al-4V Titanium

6Al-4V gives strength similar to many alloy steels at about 56% of the weight, and it resists corrosion in seawater, chlorides and the human body. It is used up to about 750°F. For higher-temperature service, see Ti 6Al-2Sn-4Zr-2Mo titanium. When a lighter, lower-cost material will do, 7075 aluminum is the usual alternative. Common uses for Ti 6Al-4V include:

  • Aircraft structural parts, fittings and fasteners
  • Jet engine fan and compressor components
  • Medical implants and surgical instruments
  • Marine, chemical and motorsport components
CNC lathe turning a metal bar

Ti 6Al-4V Titanium FAQs

Is Grade 5 the same as Ti 6Al-4V?

Yes. ASTM Grade 5 is Ti 6Al-4V. Grade 23 is the extra-low interstitial (ELI) version used for implants.

How strong is Ti 6Al-4V compared with steel?

Annealed 6Al-4V has a yield strength of about 128 ksi, similar to many heat-treated alloy steels, at a little over half the density.

Can you cut titanium to size?

Yes. We saw titanium bar and plate to your dimensions, so you only buy what you need.

Cut-to-Size Ti 6Al-4V Titanium With Delivery Across Texas

We ship Ti 6Al-4V titanium throughout Texas, Oklahoma, Louisiana, New Mexico and Arizona, and we saw bar and plate to the size you need. See our processing services for cutting options, or browse all the metals we supply. We also supply Ti 6Al-2Sn-4Zr-2Mo and 17-4PH stainless bar.

To get pricing, send us the grade, condition, form, size, length and quantity through our quote request form, or call (888) 444-6061.