410 Stainless Steel Bar (ASTM A276)
Arch Metals supplies 410 stainless steel bar from Dallas, Texas, to machine shops and manufacturers across Texas and the surrounding states. 410 is a general-purpose martensitic stainless steel with about 12% chromium. It can be hardened by heat treatment, giving it more strength and wear resistance than austenitic grades, with moderate corrosion resistance. We supply 410 bar to ASTM A276 and AMS 5613 with certified material and saw cutting to length. Request a quote and we’ll confirm sizes and availability.
410 Stainless Steel Forms
- Round bar, annealed
- Hardened and tempered bar on request
- Flat and hex bar on request
Size availability changes with mill supply. Send us your sizes through our quote request form and we’ll confirm stock, lead time and pricing.
410 Stainless Steel Conditions and Specifications
- Annealed bar (ASTM A276, AMS 5613): the soft condition for machining. Parts are usually hardened and tempered after machining.
- Hardened and tempered (ASTM A276 Condition T): heat treated for higher strength and hardness, typically in the 20s to low 40s HRC depending on tempering temperature.
- Equivalent designations (UNS S41000): also called Type 410.
Not sure which condition or specification your drawing calls for? Send us the print requirements and we’ll match the material.
Typical Properties of Annealed 410 Stainless Steel
- Ultimate tensile strength: about 75 ksi (517 MPa)
- Yield strength: about 40 ksi (276 MPa)
- Elongation: about 30%
- Hardness: about 155 HB annealed; up to about 40+ HRC hardened
- Density: 0.280 lb/in³ (7.75 g/cm³)
- Chemistry: about 12% chromium with up to 0.15% carbon
These are typical values for annealed bar. Guaranteed minimums vary by specification, condition and size, so check the governing spec or your mill cert for design values.
Why Machinists Choose 410 Stainless Steel
410 is the most economical hardenable stainless steel. It is magnetic, machines well in the annealed condition and can then be heat treated for strength and wear resistance. Its corrosion resistance is lower than 304 stainless steel, so it suits mild environments. For higher strength with better corrosion resistance, consider 17-4PH stainless bar. Common uses for 410 include:
- Pump shafts and valve components
- Fasteners, bolts and screws
- Turbine blades and steam parts
- Cutlery and hand tools
- Wear parts in mildly corrosive service
410 Stainless Steel FAQs
Is 410 stainless steel magnetic?
Yes. 410 is a martensitic stainless steel and is magnetic in both the annealed and hardened conditions.
Can 410 stainless steel be heat treated?
Yes. 410 can be hardened by heating and quenching, then tempered to the strength and toughness you need.
How does 410 compare with 304 stainless steel?
410 can be hardened and costs less, but 304 has much better corrosion resistance and is non-magnetic. Choose 410 when you need strength or wear resistance in mild environments.
Cut-to-Size 410 Stainless Steel With Delivery Across Texas
We ship 410 stainless steel throughout Texas, Oklahoma, Louisiana, New Mexico and Arizona, and we saw bar and plate to the size you need. See our processing services for cutting options, or browse all the metals we supply. We also supply 17-4PH and 15-5PH stainless bar.
To get pricing, send us the grade, condition, form, size, length and quantity through our quote request form, or call (888) 444-6061.